Running a Local Network via Aptos CLI
Local networks can be helpful when testing your code. They are not connected to any production Aptos networks like mainnet, but they are useful for three main reasons:
- No rate limits: You can interact with hosted services like the Node API, Indexer API, and faucet with no rate-limits to speed up testing.
- Reproducibility: You can set up specific on-chain scenarios and restart the network from scratch at any point to return to a clean slate.
- High availability: The Aptos devnet and testnet networks are periodically upgraded, during which time they can be unavailable. Local development networks are also always available even if you have no internet access.
Starting A Local Network
Ensure you have the Aptos CLI installed.
Ensure you have Docker installed.
- This is exclusively needed for making a production-like environment by running the Indexer API. Many downstream tools such as the Aptos SDK depend on the Indexer API.
- Docker recommends that you install via Docker Desktop to get automatic updates.
Start Docker.
Run the following command in a new terminal to start the private network:
aptos node run-local-testnet --with-indexer-api
Note: Despite the name (local-testnet
), this has nothing to do with the Aptos testnet, it will run a network entirely local to your machine.
You should expect to see an output similar to this:
Readiness endpoint: http://0.0.0.0:8070/
Indexer API is starting, please wait...
Node API is starting, please wait...
Transaction stream is starting, please wait...
Postgres is starting, please wait...
Faucet is starting, please wait...
Completed generating configuration:
Log file: "/Users/dport/.aptos/testnet/validator.log"
Test dir: "/Users/dport/.aptos/testnet"
Aptos root key path: "/Users/dport/.aptos/testnet/mint.key"
Waypoint: 0:397412c0f96b10fa3daa24bfda962671c3c3ae484e2d67ed60534750e2311f3d
ChainId: 4
REST API endpoint: http://0.0.0.0:8080
Metrics endpoint: http://0.0.0.0:9101/metrics
Aptosnet fullnode network endpoint: /ip4/0.0.0.0/tcp/6181
Indexer gRPC node stream endpoint: 0.0.0.0:50051
Aptos is running, press ctrl-c to exit
Node API is ready. Endpoint: http://0.0.0.0:8080/
Postgres is ready. Endpoint: postgres://postgres@127.0.0.1:5433/local_testnet
Transaction stream is ready. Endpoint: http://0.0.0.0:50051/
Indexer API is ready. Endpoint: http://127.0.0.1:8090/
Faucet is ready. Endpoint: http://127.0.0.1:8081/
Applying post startup steps...
Setup is complete, you can now use the local testnet!
Wait for the network to start
Once the terminal says Setup is complete, you can now use the local testnet!
the local network will be running.
If you ran into an error, look at the common errors below to debug.
Common Errors On Network Startup
Address Already In Use
panicked at 'error binding to 0.0.0.0:8080: error creating server listener: Address already in use (os error 48)'
This means one of the ports needed by the local network is already in use by another process.
To fix this on Unix systems, you can:
- Identify the name and PID of the process by running
lsof -i :8080
. - Run
kill <pid>
once you know the PID to free up that port.
Too many open files error
panicked at crates/aptos/src/node/local_testnet/logging.rs:64:10:
called \`Result::unwrap()\` on an \`Err\` value: Os { code: 24, kind: Uncategorized, message: \"Too many open files\" }
This means there were too many open files on your system. On many Unix systems you can increase the maximum number of open files by adding something like this to your .zshrc
:
ulimit -n 32768
Docker is not available
Unexpected error: Failed to apply pre-run steps for Postgres: Docker is not available, confirm it is installed and running. On Linux you may need to use sudo
To debug this, try the below fixes:
- Make sure you have docker installed by running
docker --version
. - Ensure the Docker daemon is running by running
docker info
(if this errors sayingCannot connect to the Docker daemon
Docker is NOT running) - Make sure the socket for connecting to Docker is present on your machine in the default location. For example, on Unix systems
/var/run/docker.sock
should exist.- If that file does not exist, open Docker Desktop and enable
Settings -> Advanced -> Allow the default Docker socket to be used.
- Or, you can find where the Docker socket is by running
docker context inspect | grep Host
, then symlink that location to the default location by runningsudo ln -s /Users/dport/.docker/run/docker.sock /var/run/docker.sock
- If that file does not exist, open Docker Desktop and enable
As you can see from the example output in step 4, once the local network is running, you have access to the following services:
- Node API: This is a REST API that runs directly on the node. It enables core write functionality such as transaction submission and a limited set of read functionality, such as reading account resources or Move module information.
- Indexer API: This is a GraphQL API that provides rich read access to indexed blockchain data. If you click on the URL for the Indexer API above, by default http://127.0.0.1:8090, it will open the Hasura Console, a web UI that will help you query the Indexer GraphQL API.
- Transaction Stream Service: This is a gRPC stream of transactions used by the Indexer API. This is only relevant to you if you are developing a custom processor.
- Postgres: This is the database that the Indexer processors write to. The Indexer API reads from this database.
- Faucet: You can use this to fund accounts on your local network.
If you do not want to run any of these sub-components of a network, there are flags to disable them.
If you are writing a script and would like to wait for the local network to come up with all services, you can make a GET request to http://127.0.0.1:8070
. At first this will return http code 503. When it returns 200 it means all the services are ready.
For more information on different flags you can pass when starting your local network, or configuration settings such as changing which port certain services run on, run the help command:
aptos node run-local-testnet --help
Using The Local Network
Now that the network is running, you can use it like you would any other network.
So, you can create a local profile like this:
aptos init --profile <your-profile-name> --network local
You can then use that profile for any commands you want to use going forward. For example, if you wanted to publish a Move module like the hello_blockchain
package to your local network you could run:
aptos move publish --profile <your-profile-name> --package-dir /opt/git/aptos-core/aptos-move/move-examples/hello_blockchain --named-addresses HelloBlockchain=local
Configuring the TypeScript SDK
If you want to use the local network with the TypeScript SDK, you can use local network URLs when initializing the client object (Aptos
):
import { Aptos, AptosConfig, Network } from "@aptos-labs/ts-sdk";
const network = Network.LOCAL;
const config = new AptosConfig({ network });
const client = new Aptos(config);
Resetting the local network
Sometimes while developing it is helpful to reset the local network back to its initial state, for example:
- You made backwards incompatible changes to a Move module, and you’d like to redeploy it without renaming it or using a new account.
- You are building a custom indexer processor and would like to index using a fresh network.
- You want to clear all on chain state, e.g. accounts, objects, etc.
To start with a brand new local network, use the --force-restart
flag:
aptos node run-local-testnet --force-restart
It will then prompt you if you really want to restart the chain, to ensure that you do not delete your work by accident.
Are you sure you want to delete the existing chain? [yes/no]
> yes
If you do not want to be prompted, include --assume-yes
as well:
aptos node run-local-testnet --force-restart --assume-yes