Skip to content
🎉 Welcome to the new Aptos Docs! Click here to submit feedback!
Network
Run a PFN from Source or Docker

Run a PFN from Source Code or Docker

You can run your own public fullnode (PFN) to synchronize the state of the Aptos blockchain and stay up-to-date. PFNs replicate the entire state of the blockchain by syncing from other Aptos VFNs and PFNs. PFNs can be run by anyone. This tutorial explains how to deploy a PFN and connect to an Aptos network.

Do I have to run a PFN?
If you do not wish to run a PFN, but still want to interact with the Aptos blockchain, you can use the REST API provided by the Aptos Labs’ PFNs (see Aptos APIs). Note, however, that Aptos Labs-provided PFNs have rate limits, which can impede your development. If you want to avoid such rate limits, you can deploy your own PFN and synchronize with the Aptos blockchain directly.

⚠️

Choose a network
This document describes how to start a public fullnode in the Aptos mainnet network, but it can easily be used to do the same in the devnet or testnet networks. To do so, check out the desired network branch and use the genesis.blob and waypoint.txt node files for the respective branches: mainnet, devnet, and testnet.

Hardware requirements

For running a production-grade PFN, we recommend that your hardware meet the same requirements as a validator or VFN. You can see the hardware requirements for these nodes, here: validator and VFN hardware requirements.

If you wish to run a PFN for development or testing only, lower hardware specs can be used. But, it should not be used in production. For example:

  • CPU: 8 cores, 16 threads (Intel Xeon Skylake or newer).
  • Memory: 32GB RAM.
⚠️

Minimum hardware requirements
Failing to meet the minimum hardware requirements for a production-grade PFN mean that your PFN will likely experience degradation under load and general instability in production environments.

Network requirements and ports

When you are running a PFN, you are required to open network ports on your nodes to allow other nodes (i.e., peers) to connect to you. There are different Aptos network types, and each network type uses a different port. However, the only network type that a PFN uses is the public network, where PFNs to connect to other PFNs and VFNs.

Your PFN can be configured so that the public network operates using a specific port on your node. You can configure the port settings using the node configuration YAML file. Here is an example configuration file for a PFN that configures the public network to use port 6180.

Port settings

The recommendations described below assume the default port settings used by PFNs. If you have changed the default port settings in your configuration file, then you should adjust the recommendations accordingly.

⚠️

Exposing ports
Unless explicitly required, we recommend that you do not expose any other ports while operating a PFN. This is because exposing additional ports can increase the attack surface of your node and make it more vulnerable to adversaries.

Running a PFN:

Assuming default ports are used, the following should be configured for PFNs:

  • Open the following TCP ports:
    • 6182Public network: Open this port publicly to enable PFNs to connect to your VFN.
  • Close the following TCP ports:
    • 9101Inspection service: Close this port to prevent unauthorized metric inspection.
    • 9102Admin service: Close this port to prevent unauthorized admin service interaction.
    • 80/8080 REST API: Close this port to prevent unauthorized REST API access.
⚠️

Exposing services
We note that the inspection service port (9101), admin service port (9102) and the REST API port (80 or 8080) are likely useful for your internal network, e.g., application development and debugging. However, the inspection service port and the admin service port should never be exposed publicly as they can be easily abused. Similarly, if you choose to expose the REST API endpoint publicly, you should deploy an additional authentication or rate-limiting mechanism to prevent abuse.

Default network settings
You may also need to update the 127.0.0.1 with 0.0.0.0 in the fullnode.yaml for the fields listen_address and address field in the api list.

Storage requirements

The amount of data stored by Aptos depends on the ledger history (length) of the blockchain and the number of on-chain states (e.g., accounts and resources). Both the ledger history and the number of on-chain states depend on several additional factors, including the age of the blockchain, the average transaction rate over time, and the configuration of the ledger database pruner.

Note that because archival nodes store the entire history of the blockchain, the database size on archival nodes will continue to grow unbounded. As a result, we cannot provide a recommendation for archival node storage sizes.

Devnet blockchain storage
The Aptos devnet is currently reset on a weekly basis. If you are deploying a devnet PFN, this means that the storage will be reset (i.e., wiped) every week. See the #devnet-release channel on the Aptos Discord.

Deploying a PFN

You can deploy a PFN in one of two ways: (i) building and running aptos-core from source code; or (ii) using Docker. This document describes how to deploy your PFN using both methods.

Method 1: Building and running from source

First, see Building Aptos From Source for instructions on how to download the aptos-core repository and build the binary. Then, follow the steps below:

  1. Make sure your current working directory is aptos-core.

  2. Check out the mainnet branch using git checkout --track origin/mainnet; remember, you may instead use devnet or testnet if you wish to run your PFN in a different network.

  3. Next, download the genesis.blob and waypoint.txt files for the network your PFN will connect to:

    • Run this command to download the genesis blob (for mainnet):

      Terminal
      curl -O https://raw.githubusercontent.com/aptos-labs/aptos-networks/main/mainnet/genesis.blob
    • Run this command to download the waypoint file (for mainnet):

      Terminal
      curl -O https://raw.githubusercontent.com/aptos-labs/aptos-networks/main/mainnet/waypoint.txt
    ⚠️

    Don’t want to connect to mainnet?
    To connect to other networks (e.g., devnet and testnet), you can find the genesis and waypoint here ➜ https://github.com/aptos-labs/aptos-networks. Be sure to download the genesis.blob and waypoint.txt for those networks, instead of using the genesis and waypoint pointed to by the curl commands above.

  4. Next, run the command below to create a copy of the PFN configuration YAML template:

    Terminal
    cp config/src/config/test_data/public_full_node.yaml fullnode.yaml
  5. Finally, edit the fullnode.yaml configuration file to ensure that your PFN: (i) contains the genesis blob and waypoint file you just downloaded; and (ii) saves the synchronized blockchain data to the location of your choice (on your local machine). To do this:

    1. Specify the correct path to the genesis.blob file you just downloaded by editing execution.genesis_file_location in the fullnode.yaml configuration. By default, it points to genesis.blob in the current working directory.
      fullnode.yaml
      execution:
        genesis_file_location: "./genesis.blob"
    2. Specify the correct path to the waypoint.txt file you just downloaded by editing base.waypoint.from_file in the fullnode.yaml configuration. By default, it points to waypoint.txt in the current working directory. For example:
      fullnode.yaml
      base:
        waypoint:
          from_file: "./waypoint.txt"
    3. Specify the directory on your local machine that you want to store the blockchain database by editing the base.data_dir in the fullnode.yaml configuration. For example, you can create a directory my-full-node/data in your home directory and specify it as:
      fullnode.yaml
      base:
        data_dir: "</path/to/my/homedir/my-full-node/data>"
  6. Start your local public fullnode by running the below command:

Terminal
cargo run -p aptos-node --release -- -f ./fullnode.yaml

You have now successfully configured and started running a PFN in the Aptos mainnet.

Debugging?
The command above will build a release binary for aptos-node at: aptos-core/target/release/aptos-node. The release binaries tend to be substantially faster than debug binaries but lack debugging information useful for development. To build a debug binary, omit the --release flag from the command above.


Method 2: Using Docker

This section describes how to configure and run your PFN using Docker.

⚠️

Supported only on x86-64 CPUs
Running aptos-core via Docker is currently only supported on x86-64 CPUs. If you have an Apple M1/M2 (ARM64) Mac, use the aptos-core source code approach (above). If M1/M2 support is important to you, comment on this issue: https://github.com/aptos-labs/aptos-core/issues/1412

  1. First, install Docker.
  2. Next, run the following script to prepare your local configuration and data directory for mainnet. This will download the fullnode.yaml configuration file, the genesis.blob and waypoint.txt files for your PFN, and create a data directory to store the blockchain database:
Terminal
mkdir mainnet && cd mainnet
mkdir data && \
curl -O https://raw.githubusercontent.com/aptos-labs/aptos-core/mainnet/docker/compose/aptos-node/fullnode.yaml && \
curl -O https://raw.githubusercontent.com/aptos-labs/aptos-networks/main/mainnet/waypoint.txt && \
curl -O https://raw.githubusercontent.com/aptos-labs/aptos-networks/main/mainnet/genesis.blob
⚠️

Don’t want to connect to mainnet?
To connect to other networks (e.g., devnet and testnet), you can find the genesis and waypoint here ➜ https://github.com/aptos-labs/aptos-networks. Be sure to download the genesis.blob and waypoint.txt for those networks, instead of using the genesis and waypoint pointed to by the curl commands above.

  1. Next, make sure that the fullnode.yaml configuration file that you downloaded above contains only the following content. This will ensure that this configuration is for a PFN and not for another node type (e.g., validator or VFN):
fullnode.yaml
base:
  role: "full_node"
  data_dir: "/opt/aptos/data"
  waypoint:
    from_file: "/opt/aptos/etc/waypoint.txt"
 
execution:
  genesis_file_location: "/opt/aptos/etc/genesis.blob"
 
full_node_networks:
  - network_id: "public"
    discovery_method: "onchain"
    listen_address: "/ip4/0.0.0.0/tcp/6182"
 
api:
  enabled: true
  address: "0.0.0.0:8080"
⚠️

Don’t want to allow inbound connections?
Override the following if you do not want other PFNs connecting to yours: listen_address: "/ip4/127.0.0.1/tcp/6182". Also see the note, below.

  1. Next, run the following docker command:
Terminal
docker run --pull=always \
    --rm -p 8080:8080 \
    -p 9101:9101 -p 6180:6180 \
    -v $(pwd):/opt/aptos/etc -v $(pwd)/data:/opt/aptos/data \
    --workdir /opt/aptos/etc \
    --name=aptos-fullnode aptoslabs/validator:mainnet aptos-node \
    -f /opt/aptos/etc/fullnode.yaml
⚠️

Sudo access
Note: you may need to prefix the docker command with sudo depending on your configuration.

Docker tags The mainnet tag always refers to the latest official Docker image tag. You can find the latest hash for comparison at: https://github.com/aptos-labs/aptos-networks/tree/main/mainnet

Verify the correctness of your PFN

Verify initial synchronization

During the initial synchronization of your PFN, there may be a lot of data to transfer (read more about how state sync works in the state sync guide). You can monitor state sync progress by querying the metrics port to see what version your node is currently synced to. Run the following example command to see the currently synced version of your node:

Terminal
curl 127.0.0.1:9101/metrics 2> /dev/null | grep "aptos_state_sync_version{.*\"synced\"}" | awk '{print $2}'

The command will output the current synced version of your node. For example:

Terminal
71000

Compare the synced version returned by this command (e.g., 71000) with the highest version shown on the Aptos explorer page. If your node is catching up to the highest version, it is synchronizing correctly. It is fine if the explorer page differs by a few versions, as the explorer nodes may sync with some variance.

⚠️

Using fast sync?
If your node is fast syncing, the command may show 0 until it has finally caught up. To verify that the node is fast syncing, run the following command:

Terminal
curl 127.0.0.1:9101/metrics 2> /dev/null | grep "aptos_state_sync_version{.*\"synced_states\"}" | awk '{print $2}'

This should show an increasing number of synced states. It may take several hours for your node to fast sync to the latest version. Eventually, once fast syncing is complete, the aptos_state_sync_version{.*"synced"} command will return the current synced version of your node.

You can read more about fast syncing here: State sync bootstrapping.

(Optional) Verify outbound network connections

If you wish, you can also check the outbound network connections for your PFN. The number of outbound network connections should be more than 0 for healthy PFNs. Run the following command:

Terminal
curl 127.0.0.1:9101/metrics 2> /dev/null | grep "aptos_connections{direction=\"outbound\""

The above command will output the number of outbound network connections for your node. For example:

Terminal
curl 127.0.0.1:9101/metrics 2> /dev/null | grep "aptos_connections{direction=\"outbound\""
aptos_connections{direction="outbound",network_id="Public",peer_id="aabd651f",role_type="full_node"} 3

If the number of outbound connections returned is 0, then it means your node cannot connect to the Aptos blockchain. If this happens to you, follow these steps to resolve the issue:

  1. Update your node to the latest release by following the Update Fullnode With New Releases.
  2. Remove any seed peers you may have added to your configuration file. The seeds may be preventing you from connecting to the network. Seed peers are discussed in the Connecting your fullnode to seed peers section.
  3. Ensure that you have used the correct genesis.blob and waypoint.txt files for your network. This is a common error.

(Optional) Examine Docker ledger size

If you are running your PFN using Docker, you can monitor the size of the blockchain ledger by entering the Docker container and checking the size. This will allow you to see how much storage the blockchain ledger is currently consuming.

  • First, run docker container ls on your terminal and copy the NAME field output. This will be a string similar to public_full_node_fullnode_1.
  • Next, run these commands to check the storage size consumed by the ledger, using the NAME field you copied over in place of public_full_node_fullnode_1:
Terminal
# Obtain the container ID:
id=$(docker container ls | grep public_full_node_fullnode_1 | grep -oE "^[0-9a-zA-Z]+")
 
# Enter the container:
docker exec -it $id /bin/bash
 
# Observe the volume (ledger) size:
du -cs -BM /opt/aptos/data